Choosing a Manufactured Home
![](https://d12m281ylf13f0.cloudfront.net/images06/InterNACHImanufacturedhome.jpg)
- structural workmanship;
- factory-installed plumbing, heating and electrical systems;
- factory-installed appliances, which also may be covered by separate warranty; and
- appliance manufacturer warranties.
Armstrong Home Inspection Service, LLC
Home Inspector or Home Inspection
by Nick Gromicko, CMI®
Carbon monoxide (CO) is a colorless, odorless, poisonous gas that forms from incomplete combustion of fuels, such as natural or liquefied petroleum gas, oil, wood or coal.
Facts and Figures
Physiology of Carbon Monoxide Poisoning
When CO is inhaled, it displaces the oxygen that would ordinarily bind with hemoglobin, a process the effectively suffocates the body. CO can poison slowly over a period of several hours, even in low concentrations. Sensitive organs, such as the brain, heart and lungs, suffer the most from a lack of oxygen.
High concentrations of carbon monoxide can kill in less than five minutes. At low concentrations, it will require a longer period of time to affect the body. Exceeding the EPA concentration of 9 parts per million (ppm) for more than eight hours may have adverse health affects. The limit of CO exposure for healthy workers, as prescribed by the U.S. Occupational Health and Safety Administration, is 50 ppm.
Potential Sources of Carbon Monoxide
Any fuel-burning appliances which are malfunctioning or improperly installed can be a source of CO, such as:
PPM | % CO in air |
Health Effects in Healthy Adults | Source/Comments |
0 | 0% | no effects; this is the normal level in a properly operating heating appliance | |
35 | 0.0035% | maximum allowable workplace exposure limit for an eight-hour work shift | The National Institute for Occupational Safety and Health (NIOSH) |
50 | 0.005% | maximum allowable workplace exposure limit for an eight-hour work shift | OSHA |
100 | 0.01% | slight headache, fatigue, shortness of breath, errors in judgment |
|
125 | 0.0125% | workplace alarm must sound (OSHA) | |
200 | 0.02% | headache, fatigue, nausea, dizziness |
|
400 | 0.04% | severe headache, fatigue, nausea, dizziness, confusion; can be life-threatening after three hours of exposure | evacuate area immediately |
800 | 0.08% | convulsions, loss of consciousness; death within three hours |
evacuate area immediately |
12,000 | 1.2% | nearly instant death |
CO Detector Placement
CO detectors can monitor exposure levels, but do not place them:
Do place CO detectors:
In North America, some national, state and local municipalities require installation of CO detectors in new and existing homes, as well as commercial businesses, among them: Illinois, Massachusetts, Minnesota, New Jersey, Vermont and New York City, and the Canadian province of Ontario. Installers are encouraged to check with their local municipality to determine what specific requirements have been enacted in their jurisdiction.
How can I prevent CO poisoning?
In summary, carbon monoxide is a dangerous poison that can be created by various household appliances. CO detectors must be placed strategically throughout the home or business in order to alert occupants of high levels of the gas.
Interstate Land Sales
Be well informed when shopping for land. Lots may be marketed as sites for future retirement homes, for second home locations, or for recreational or campsite use. However, be wary of any investment aspect that may be stressed by sales personnel. If you plan to purchase a lot which is offered by promotional land sales, take plenty of time before coming to a decision. Before signing a purchase agreement, a contract, or a check:
The company filing this information must swear and affirm that it is correct and complete, and an appropriate fee must accompany submission. The information is retained by HUD and is available for public inspection. The property report, which is also prepared by the developer, goes to the buyer. The law requires the seller to give the report to a prospective lot purchaser prior to the time a purchase agreement is signed. Ask for it. The seller is also required to have the buyer sign a receipt acknowledging receipt of the property report. Do not sign the receipt unless you have actually received the property report. Check the developer’s property report before buying. This is the kind of information you will find in a property report:
Read the Property Report Before Signing Anything
Your Contract Rights
Contract Rights Concerning Property Reports
Other exemptions are available which are not listed above. If you have reason to believe that your sale is not exempt and may still be covered by the law, contact the Interstate Land Sales Division.
This is a partial list of points to consider before you commit your money or your signature.
Basements are typically the area of a structure most at risk for water damage because they are located below grade and surrounded by soil. Soil releases water it has absorbed during rain or when snow melts, and the water can end up in the basement through leaks or cracks. Water can even migrate through solid concrete walls via capillary action, which is a phenomenon whereby liquid spontaneously rises in a narrow space, such as a thin tube, or via porous materials. Wet basements can cause problems that include peeling paint, toxic mold contamination, building rot, foundation collapse, and termite damage. Even interior air quality can be affected if naturally occurring gasses released by the soil are being transmitted into the basement.
Properly waterproofing a basement will lessen the risk of damage caused by moisture or water. Homeowners will want to be aware of what they can do to keep their basements dry and safe from damage. Inspectors can also benefit from being aware of these basic strategies for preventing leaks and floods.
Prevent water entry by diverting it away from the foundation.
Apply sodium-silicate sealant to the walls and floor.
Once all runoff has been thoroughly diverted away from the foundation, and all cracks and holes have been repaired and no leaking is occurring, a waterproof sealant can be applied as a final measure.
One end of a combination wrench set is open and the other end is a closed loop. Nuts and bolts are manufactured in standard and metric sizes, and because both varieties are widely used, you’ll need both sets of wrenches. For the most control and leverage, always pull the wrench toward you, instead of pushing on it. Also, avoid over-tightening.
Use slip-joint pliers to grab hold of a nail, a nut, a bolt, and much more. These types of pliers are versatile because of the jaws, which feature both flat and curved areas for gripping many types of objects. There is also a built-in slip-joint, which allows the user to quickly adjust the jaw size to suit most tasks.
Adjustable wrenches are somewhat awkward to use and can damage a bolt or nut if they are not handled properly. However, adjustable wrenches are ideal for situations where you need two wrenches of the same size. Screw the jaws all the way closed to avoid damaging the bolt or nut.
8. Hacksaw
A hacksaw is useful for cutting metal objects, such as pipes, bolts and brackets. Hacksaws look thin and flimsy, but they’ll easily cut through even the hardest of metals. Blades are replaceable, so focus your purchase on a quality hacksaw frame.
9. Torpedo Level
Only a level can be used to determine if something, such as a shelf, appliance or picture, is correctly oriented. The torpedo-style level is unique because it not only shows when an object is perfectly horizontal or vertical, but it also has a gauge that shows when an object is at a 45-degree angle. The bubble in the viewfinder must be exactly in the middle — not merely close.
10. Safety Glasses / Goggles
For all tasks involving a hammer or a power tool, you should always wear safety glasses or goggles. They should also be worn while you mix chemicals.
11. Claw Hammer
A good hammer is one of the most important tools you can own. Use it to drive and remove nails, to pry wood loose from the house, and in combination with other tools. They come in a variety of sizes, although a 16-ounce hammer is the best all-purpose choice.
12. Screwdriver Set
It is best to have four screwdrivers: a small and large version of both a flathead and a Phillips-head screwdriver. Electrical screwdrivers are sometimes convenient, but they’re no substitute. Manual screwdrivers can reach into more places and they are less likely to damage the screw.
14. Respirator / Safety Mask
While paints and other coatings are now manufactured to be less toxic (and lead-free) than in previous decades, most still contain dangerous chemicals, which is why you should wear a mask to avoid accidentally inhaling. A mask should also be worn when working in dusty and dirty environments. Disposable masks usually come in packs of 10 and should be thrown away after use. Full and half-face respirators can be used to prevent the inhalation of very fine particles that ordinary facemasks will not stop.
Welcome to Home Inspector Pro Sites. This is your first post. Edit or delete it, then start blogging!
St Louis, Carlton, and Northern Pine Counties including Duluth, Hermantown, Proctor, Esko, Cloquet, Saginaw, Lakewood, Two Harbors, Rice Lake, Island Lake, Canyon, Cotton, Meadowlands, Hibbing, Chisholm, Virginia, Eveleth, Gilbert, Biwabik, Aurora, Hoyt Lakes, Carlton, Wrenshall, Mahtowa, Barnum, Moose Lake, Sturgeon Lake, Willow River, Sandstone, Brookston, Floodwood, Cromwell, Mcgregor, and Surrounding Areas.